Servo Magazine ( March 2008 )
Reviving an Androbot BOB | Part 2
By Robert Doerr View In Digital Edition
Last month, you read about how I started re-using some leftover robotics components to revive an old Androbot BOB robot chassis. I focused on what was needed to control the drive motors in the BOB base. I also covered upgrades to an old Handy Board controller to make it more suitable for use on a larger robot and enhancements to the board to make it more reliable. Since the only thing I had to start with was the empty robot shell and drive motors, this entire project is covering the rest of ...
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Article Comments