Servo Magazine ( December 2008 )
Getting Control With the Propeller | Part 4 | Propeller Multi-Controller
By Chris Savage View In Digital Edition
This month, we wrap up our four part series by covering practical use of PWM on the Propeller using our multi-controller board. In last month’s article, Kevin McCullough covered stepper motor control and made schematics available on the project web page. These schematics use the L293D Quad Half-H Driver IC which provides bi-directional drive currents of up to 600 mA from 4.5V to 36V. We will use the L293D in this article for both motor control and light dimming...
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Article Comments